多波長 ゲイン平坦性 Er添加ファイバアンプ(EDFA) Pre-Amplifier
Cバンド、ゲイン25dB。
C-Band,Gain 25dB.
Multi-Wavelength Gain EDM Module (GFF EDFA Module) is a dedicated fiber optic communication system for fiber amplifier products.
With multiple wavelengths,Gain flattening,as well as the advantages of high gain and low noise.
Support the host computer software control, compact and easy to integrate.
[特性]
1. Iniaturization and modularization design.
2. Wide operating wavelength range.
3. High gain, gain flat.
4. Good temperature adaptability.
[応用]
1. Optical Fiber Communication
2. Optical fiber sensing
3. Fiber lasers
パラメータ | 単位 | 最小値 | 典型的な値 | 最大値 | 備考 |
Wavelength range | nm | 1530 | 1550 | 1560 | The wavelength range can be customized |
Input power | dBm | -32 | |||
Output power | dBm | 14 | |||
Gain | dB | 25 | |||
Gain flatness | dB | 0.8 | 1.5 | ||
Polarization dependent gain | dB | 0.5 | |||
Polarization mode dispersion | ps | 0.5 | |||
Input / output isolation | dB | 40 | |||
Noise figure | dB | 5 | 5.5 | ||
Operating temperature range | °C | -20 | +65 | ||
Operating humidity range | % | 70 | |||
Pigtail connector type | FC/APC | Accept custom | |||
Input and output pigtail type | Single mode fiber SMF-28e | ||||
Power supply | V(DC) | +3.3 or +5V | |||
Size and electrical interface | mm | 150 × 125 × 20 (electrical interface DB25); 90 × 70 × 15 (electrical interface 30PIN) |
Optional 160 × 120 × 55 (RS232 interface) |
||
Operating mode | AGC (Automatic Gain Control) | ||||
Model |
型番#01 I型標準型 |
選択する |
この商品は2017年03月02日(木)に登録されました。