手動微調整プラットフォーム 鋼線ボールガイド F13-420G(L,R,C) 40*40

価格: ¥10,247円


数量. 
+-

手動微調整プラットフォーム 鋼線ボールガイド  F13-420G(L,R,C) 40*40

特長:
1.The model is available in three directions,  F13-420GL(left),  F13-420GC(center),  F13-420GR(right).
  このタイプは3つの方向に任意,  F13-420GL(左),  F13-420GC(中),  F13-420GR(右)。
2.Differential head adjustment,can direct reading |微分頭調節、直接読取り
3.The bottom of the hole to facilitate the combination of other models,or directly installed on the rack.
   底部に瀋穴があると、他の機種があるまたは直接取り付けてラックに取り付けている。
4.Cross roller guide,imported cage, smooth operation, small friction, suitable for large load applications.
   交叉ローラーガイド,輸入ホルダー、運行の安定、摩擦力は小さくて、適大負荷場合応用.
5.The main material for aluminum,black surface treatment, exquisite appearance.
  主な素材はアルミ合金,表面の黒ずん処理、外観の美しい繊細な.
6.Spring reset, quantitative reading, eliminate the axial gap, the side surface of the positioning device, to avoid drift.
   スプリングリセット、定量の読み取りを軸方向隙間、サイド設計位置決め装置、避けドリフト。
7.The use of high-precision CNC processing, to ensure that the product straightness, deflection, tilt, parallel.
  採用高精度CNC加工、有効に保証する製品の直線性、偏り、仰向け、平行度。

応用:
1.光学実験
2.光部品生産
3.光カップリング
4.自動設備精密変位
5.照準
6.科学研究

注意:
Default F13-420GC model,if you need other models,please specify or contact us.
黙認 F13-420GC 型番、需要その他の型番の、明記して下さい、または連絡。
 

型番 F13-420GC   F13-420GL F13-420GR
メサのサイズ 40*40mm 40*40mm 40*40mm
行程 ±6.5mm ±6.5mm ±6.5mm
解像度 0.001mm 0.001mm 0.001mm
ピッチ 0.5mm 0.5mm 0.5mm
軌道類型 直線光軸  直線光軸  直線光軸
最小目盛 0.01mm 0.01mm  0.01mm  
直線度  ±10μm ±10μm ±10μm
平行度  ±40μm ±40μm ±40μm
平坦度  ±10μm ±10μm ±10μm
重量 0.15kg 0.15kg 0.15kg
荷重量   3kgf 3kgf 3kgf
手動微調整プラットフォーム 鋼線ボールガイド  F13-420G(L,R,C) 40*40

手動微調整プラットフォーム 鋼線ボールガイド  F13-420G(L,R,C) 40*40

手動微調整プラットフォーム 鋼線ボールガイド  F13-420G(L,R,C) 40*40

手動微調整プラットフォーム 鋼線ボールガイド  F13-420G(L,R,C) 40*40
 

この商品は2017年05月15日(月)に登録されました。